Service manual

CONTROL OPERATION & PROGRAMMING SUMMARY
MODE OPERATION RESULT/RESPONSE
OPTIONS
“OPTS”
(Press Mode
Switch Four
Times)
Bill Handling
Press Selection Switch #1
(Continue to press #1 until desired
setting is reached.)
Bill Handling
1 = Force Vend if bill is accepted. Scavenger lever will return
change.
2 = Change Machine
3 = Bill accepted is held in escrow. Scavenger lever will return
bill.
Correct Change Acceptance
Press Selection Switch #2
(Continue to press #2 until desired
setting is reached.)
Correct Change Vending
1 = Only correct change accepted for vend
2 = Correct change or greater accepted for vend
3 = Same as #1 Special Application Only
4 = Same as #2 Special Application Only
Zero Indicator
Press selection switch #3
(Continue to press #3 until desired
setting is reached.)
“o” in Display to Indicate Sold Out or Jammed Column(s)
1 = On
2 = Off
Fast Price Set
Press selection switch #4
(Continue to press #4 until desired
setting is reached.)
Fast Price Set
1 = Each selection’s price set individually
2 = All selections same price as selection 1’s
price
Door Closed Data
Press selection switch #5
(Continue to press #5 until desired
setting is reached.)
Door Closed Sales Data Retrieval
1 = Off
2 = On (After 5 seconds, displays passcode)
Control Board Identification
Press selection switch #6
Displays control board ID and software revision level
(Example: “1 5.1 1061”)