Service manual

CONTROL OPERATION & PROGRAMMING SUMMARY
MODE OPERATION RESULT/RESPONSE
OPTIONS TWO
“OPT 2”
(Press Mode
Switch Five Times)
Options 2 Is Used
Only On Models
With
Acceptance Non-Tube Coins
(Special application Only)
Press selection switch #1
(Continue to press #1 until desired
setting is reached.)
Acceptance of Non-Tube Coins
5 = Must have adequate change for existing credit, value of
Non-Tube coin, and for all possible selections. (Factory
Setting, USA)
6 = Must have adequate change for existing credit and value of
Non-Tube coin (International)
VEC 5.1-1061. All
Settings Should
Remain At Factory
Unless Special
Applications
Apply.
Multi-Vend Option
(Special Application Only)
Press selection switch #2
(Continue to press #2 until desired
setting is reached.)
Allows Single Or Multiple Vends From One Purchase
5 =Does not allow multiple vends. (Factory Setting)
6 = Allows multiple vends.
Product Count
Press selection switch #3
(Continue to press #3 until desired
setting is reached.)
Product count displays history of product vended.
5 = Count shows vends per selection. (Factory Setting)
6 = Count shows vends per price.
Change Pay-Out
(Special Application Only)
Press selection switch #4
(Continue to press #4 until desired
setting is reached.)
Change paid out when money is accepted.
5 = Yes, pay out change after selection is made.(Factory
Setting)
6 = No, remaining credit will be erased after selection is made.