Service manual

CONTROL OPERATION & PROGRAMMING SUMMARY
MODE
PREPROGRAMED SPACE-TO SALES CONFIGURATIONS
QUICK SET SSS
SETTING 10 9 8 7 6 5 4 3 2 1
“SSSS”
SEL # COL COL COL COL COL COL COL COL COL COL
(Press Mode Switch Six
1
1 1,2 1 1,2 1 1 --- --- 1 1
Times to Display SSS.
2
2 3 2 3 2 2 --- --- --- 2
Then Press Reset Button
3
3 4 3 4 3 3 --- --- --- 3
Twice.)
4
4 5 4 5 4 4 --- --- --- 4
5
5 6 5 6 5 5 --- --- --- 5
6
6 7 6 7 6 --- --- --- --- 6
7
7 8 7 8 --- --- --- --- --- 7
8
8 9 8 --- --- --- --- --- --- ---
9
9 10 --- --- --- --- --- --- --- ---
10
10 --- --- --- --- --- --- --- --- ---
After “SSSS ” is displayed, selection switches 1-10 are used to obtain desired settings. The most
commonly used setting can be obtained by using the last selection switch.
TIMER CONTROL
“TCTL”
NOTE: This mode has no meaning or effect for vendors as produced. This mode is effective only
when an optional timer or key switch device is installed.
(Press Mode Switch Seven
Times)
Press any selection switch Displays Selection’s Current Setting
Yes = Always vends regardless of timer
No = Vending controlled by timer operation
Press Same Selection Changes Selection’s Setting
(Factory Setting = All Selections Set to No
For detailed instructions refer to the Service & Operation Manual or you may call the Technical Services Department of The Vendo Company
at 800-344-7216 or 559-439-1770.