t @o@c Introduction i S a @s @f QP w@c S r @c@O@p@r HI QP q@r T v @m r @m @M@b @r Q@w@r @b@f g @s @f 2 QP T U U r @s@e@d QQ a@d QR W l @l @w QT a @lOa@@uOd W a@t@r @s@f W m@t@r @s@f@Hr
Quick Reference r @m Mb @r v @m When servicing or loaning your vehicle to others, the system should be in Valet mode. Valet mode prevents the system from remote starting and disables all alarm functions. IMPORTANT: While in Valet mode the remote will still control power lock and unlock systems. The parking lights will not flash. The system can be put into valet one of three ways: 1. Turn the vehicle’s key to the ignition “on” position and tap buttons simultaneously for 0.
General System Functions Button Duration Additional Programming Required Function / Description The remote transmitter functions have been predetermined and programmed from the factory. The four button configuration allows for many functions to be performed through a series of tapping, holding and / or multiple presses of buttons. Although Firstech remotes have numerous button functions and capabilities, please keep in mind that the most common functions are performed in one simple step.
General System Functions m@t@r @s@f@Hr @m I In order to remote start a manual transmission vehicle, the system must first be set in Reservation Mode. Reservation Mode must be set each and every time you want to remote start a manual transmission vehicle. The purpose of Reservation Mode is to leave the transmission in neutral before exiting the vehicle. IMPORANT The transmission must be left in the neutral position. The vehicles windows must be rolled up.
Advanced System Functions There are lots of advanced features available for your system. Please go to www.compustar.com for more details. Remote Coding / Programming Routine (S) IMPORTANT: Every Firstech remote must be coded to the system prior to performing any operations. All remotes must be coded at the same time. p@Qw@T@b@r Z STEP 1: Activate Valet/Programming mode by manually turning the ignition key on and off (between the Acc & On positions) five times within 7 seconds.
Alarm Diagnostic Limited Lifetime Warranty While the alarm is armed, the LED will blink slowly. While the siren is going off, the LED will indicate the specific zone that was triggered. Upon disarming the alarm after it has been triggered, the amount of siren chirps will indicate the specific zone.
102REUSC001902 / FT-1W-ES V1 By Firstech LLC Version 1.1 Toll Free : 888-820-3690 Toll Free : 888-820-3690 21911 68th Ave S Kent, WA 98032 By Firstech LLC Version 1.