Instruction Manual

DeviceMaster 500 User Guide: 2000501 Rev. A Device Driver Installation - 25
Device Driver Installation
Before installing the NS-Link device driver, the following conditions must be met:
The DeviceMaster 500 is connected to the network and powered on (Hardware
Installation on Page 9)
The network information has been configured in the DeviceMaster 500
(Configuring the Network Settings
on Page 20)
If this is the initial device driver installation, verify that the DeviceMaster 500
contains the latest version of SocketServer (Checking the SocketServer Version
on Page 22)
After NS-Link driver installation and configuration, the same ports can be
configured as TCP/IP sockets using an NS-Link version of the SocketServer web
page (Socket Port Configuration
on Page 37).
Linux Installation
Refer to the README file provided with the Linux® driver for installation and
configuration procedures. Locate the latest device driver for Linux:
CD Installation: Use the CD to check the driver version on the CD against
the latest released version. Open the /html/default.htm file to use the menu
system.
Download the latest device driver: http://www.comtrol.com/support/
download.asp?partnumber=1800026.
Note: Linux supports 500K natively, however this driver remaps 300 baud to 500K
baud to mimic our Windows driver functionality.
Windows Installation
This subsection provides a installation overview for Windows 2000, Windows XP,
Windows Server 2003, and Window Vista.
1. Locate the latest device driver for Windows and NS-Link User Guide for
Windows:
CD Installation: You can use the CD to check the driver version on the
CD against the latest released version.
Download the latest device driver: http://www.comtrol.com/support/
download.asp?partnumber=1800288.
Download the latest NS-Link User Guide for Windows, which contains
detailed installation and configuration information or procedures to update
an existing installation: http://www.comtrol.com/support/
download.asp?partnumber=2000339
2. Unzip the driver assembly.