Network Hardware User Manual

32
Under the Option Tab general settings and advanced settings are shown.
Options
Under General Setting, check “Auto launch when Windows starts up” so
that WLAN automatically launches when Windows starts up. Check “Enable
IP Setting in Profile” to enable the IP settings made under IP Config in the
Wireless Network Properties screen of Configuration Tab. If checked, the
current IP settings will be saved. If unchecked (and previously checked),
previous IP settings will be restored. Check “Disable Radio” to disconnect
the network connection without removing the C54U Wireless USB Stick
Adapter.
Under Advance Setting, there are settings for Radio Frequency, Start
adhoc Channel, Power Save Mode, Transmit Power and Super G. Please
set Super G “Enable” to drive transmit rate upto 108Mbps.
The WLAN card to connect allows the user to set the WLAN type to
connect: infrastructure and ad-hoc network, infrastructure network only,
or ad-hoc network only. You may also automatically connect to non-
preferred networks by checking the option.