Instructions / Assembly

9
Fig. 14b
Switch Housing Shell
Fig. 15b
Depending on which model of Heritage Square
you are installing, you will either have the 4
Light Turtle Cluster (figure 14 a & b) or the
Bowl Light (figure 15 a & b). Please follow
instructions under the correct light fixture.
T
urtle Cluster:
Connect white wire to white wire and blue wire
to black wire. Secure with wire nuts.
Remove switch housing screws. Press fixture
up into switch housing shell, aligning screw
holes. Insert (3) screws and tighten firmly (see
figure 14a).
Slide glass shades over sockets and tighten set
screws until snug to glass. Install 60watt bulb
(see figure 14b).
Bo
wl Glass:
Connect white wire to white wire and blue wire
to black wire. Secure with wire nuts.
Remove switch housing screws. Press light kit
fixture up into switch housing shell, aligning
screw holes. Insert (3) screws and tighten firm-
ly (see figure 15a).
Install (2) 60watt Medium Base bulbs. Slide
bowl glass over the threaded nipple, followed by
the glass cap, and then finial. Twist finial clock-
wise until snug.
Lower chains thru hole in bowl glass and glass
cap. Attach chain extensions (see figure 15b).
Step 7 Installation of Light Fixture
Fig. 14a
Switch Housing Shell
Switch Housing
Screw
Switch Housing
Screw
Blue
Black
Blue
Black
White
White
Forward/Reverse Switch
Forward/Reverse Switch
Fan Switch Chain
Fan Switch Chain
Light Fixture
Light Switch Chain
Side Glass
Shade
60w Medium Base
Fig. 15a
60w
Medium
Base
Socket
Light Kit Fixture
Glass Cap
Finial
Bowl Glass
Chain
Extension