Instructions / Assembly

Loosen the two canopy mounting screws on the

downside face of the mounting bracket. Back

them out about half way. This will allow for

easier installation of the ceiling canopy later.

Install the mounting bracket to the electrical

junction box in the ceiling. Using two (2)

machine screws, two (2) washers, and two (2)

lockwashers (see figure 2).

The mounting bracket has slotted holes to enable

it to move sideways for proper alignment. Make

sure the mounting bracket is centered over the

electrical junction box and that it is securely

attached (see figure 3).

NO MOVEMENT SHOULD OCCUR

BETWEEN THE MOUNTING BRACKET AND

THE ELECTRICAL JUNCTION BOX.

Step 1 Attach the mounting bracket

Have you

TURNED OFF

the Electricity?

This fan is shipped with 2 downrods. 6” for regular ceil-

ing application and 2” for low ceiling application.

Choose the one that fits your need.

Slotted Holes

Junction Box

Canopy Mounting

Screw

Fig. 1

Fig. 2

Fig. 3