Instructions / Assembly

12
Junction Box
Safety Screw
Washer and
Lock Washer
Speed Switch
Mounting Screw
Mounting Screw
and Fiber Pad
Ceiling Canopy
Support Rod
Canopy Mounting
Screws
Fan Body
Support Rod
Coupler
Fan Blade
Set Screw
Reverse Switch
Blade Holder Arm
Mounting Screw
Electrical Switch
Housing
© Great 2000 Enterprises, Inc., 2005 • ALL RIGHTS RESERVED •
No part of this publication may be produced, transmitted, transcribed, stored in a retrieval system, or translated into any language
in any form by any means without the written permission of Great 2000 Enterprises, Inc..
Concord Fans and Lighting is a division of Great 2000 Enterprises, Inc.
®
Mounting Bracket
Your new CONCORD ceiling fan is now ready
for use. Reset your circuit breaker and restore
power to the circuit. See the Operation
Instructions below to review the function of
each control on your fan.
The pull chain located on the switch housing (see
figure 16) controls the speed of your fan. When
the fan is OFF, pull the chain once for HIGH
speed, twice for MEDIUM speed, three times for
LOW speed and fourth time to turn it off again.
The slide switch located on the switch housing
(see figure 16) controls the direction of blade rota-
tion. The UP position sets the blades in
REVERSE rotation (air moves UP). The
DOWN position sets the blades in FORWARD
rotation (air moves DOWN).
Operation Instructions
Maintenance
Your fan requires very little maintenance.
Cleaning of the housing should be done with a
damp soft cloth (NO CLEANING AGENTS).
On the blades, use a duster or dry cloth because
any moisture could cause the blades to warp.