Instructions / Assembly

6
Fig. 1
Fig. 2
Fig. 3
Slotted Holes
Junction Box
Ceiling Canopy Mounting Screw
Have you
TURNED OFF
the Electricity?



Loosen the two canopy mounting screws on
the downside face of the mounting bracket.
Back them out about half way. This will
allow for easier installation of the ceiling
canopy later (see figure 1).
Install the mounting bracket on the electrical
junction box in the ceiling using two machine
screws, two washers and two lock washers
(see figure 2).
The mounting bracket has slotted holes to
enable it to move sideways for proper align-
ment. Make sure the mounting bracket is
centered over the electrical junction box and
that it is securely attached (see figure 3).
NO MOVEMENT SHOULD OCCUR
BETWEEN THE MOUNTING BRACKET
AND THE ELECTRICAL JUNCTION
BOX.
Step 1 Attach the mounting bracket