User guide

92 Settings
Specifying Computers That Are Not Allowed to Access the Network
1. Log in to the home page.
2. Click Advanced settings > Wi-Fi > MAC Filter.
3. In the MAC Filter Mode list, click Block all in list.
4. Determine and block an undesired user of your network.
䡲 Click the
List of connected devices link.
䡲 If
you see a device you don’t recognize, you can compare its MAC address to the MAC address
of each of the devices on your network.
To determine the MAC address of each device y
ou have, see “Finding the MAC Address” on
page 128. If none of your devices have this MAC address, that device might be an intruder.
䡲 In the r
ow for the device you want to block, click Add.
5. For each computer you want to block, repeat step 4.
Tip: The Connected Users window has a Block check box, available for each currently connected user.
(See “Wi-Fi Users Information and Settings” on page 47.)
Removing a Computer From the Allowed or Disallowed Lists
1. Log in to the home page.
2. Click Advanced settings > Wi-Fi > MAC Filter.
3. In the MAC Filter Mode list, click either Allow all in list or Block all in list.
4. Click the row that you want to remove. A row of buttons (Delete, OK, Cancel) appears.
5. Click Delete.
Displaying a List of Currently Connected Computers
1. Make sure you’re logged in to the home page.
2. Click the icon to display the Connected Users window.
— or —
Click
Advanced settings > Wi-Fi > Mac Filter, and click List of connected devices.
A row displays the
icon if the user is logged in as administrator.