User guide
Settings 95
Settings
Section 5H
Configuring 3G and 4G
⽧ Viewing 3G Activation Information (page 95)
⽧ 3G Panel (page 95)
⽧ Resetting the 3G and 4G Configurations to Default Settings (page 96)
Viewing 3G Activation Information
1. Log in to the home page.
2. Click Advanced settings ( ).
3. Click Device > About.
The following fields are related to 3G activation:
●
Activation Status — This field reflects whether 3G is activated.
●
Activation Date — This is the date that the 3G modem was first activated.
●
Network Operator — This field shows the carrier that your device was activated with.
3G Panel
1. Log in to the home page.
2. Click Advanced settings ( ).
3. Click WAN > 3G.
From this window, you can view this information:
●
Connection Status — This field reflects the status of the 3G connection: connected, not
connected, or dormant.
Dormant mean
s a connection is established, but no data is being transferred.
●
Service Type — This is the network that is currently being used for your data connection (1xRTT,
EVDO, or EVDO Rev. A).
●
Coverage Type — This is a list of the types of 3G networks that are available. The RSSI and
Ec/Io for each type are shown.
RSSI reflects the signal strength of the network.
Ec/Io is a dimensionless ratio of the average power of a
channel, typically the pilot channel, to
the total signal power.
●
MDN (Mobile Directory Number) — This is a 10-digit phone number.
●
SID (System ID) — The System ID identifies your home network area and is used in conjunction
with your phone number to determine if you are “home” or “roaming.”