User guide

Settings 105
Settings
DNS Mode
The DNS Mode setting specifies how the DNS servers (that the DHCP clients are to communicate
with) are obtained.
1. Log in to the home page.
2. Click Advanced settings ( ).
3. Click Router > LAN.
4. Set DNS Mode to one of the following:
䡲
Auto — The DNS server specified by Sprint is used. DNS Relay is enabled by default.
䡲
Manual — The routing hardware assigns DHCP clients the DNS servers specified in the
Manual DNS Server #1 and #2 fields.
Use this option to access a DNS server that provides customized addressing or if you have
a
local DNS server on your network.
If
DNS Relay is disabled, the routing hardware rejects DNS requests targeting the internal
DNS proxy.
For information on DNS Relay, see “LAN Panel” on page 101.
Port Forward Panel
Normally, incoming traffic (from the Internet) is blocked. However, port forwarding lets you forward
incoming traffic to specific ports and devices (per their local IP address) on your network. For
example, you can configure port forwarding so that:
● Y
ou can access your Remote Desktop from the Internet (by specifying the WAN [public] IP
address that the device is using).
● In
ternet users can access a Web, FTP, or email server, or gaming or Internet application hosted
by your computer.
Before you can use or configure port forwarding, you must enable it, as explained in “Enabling
Port Forwarding” on page 106.
From the
Port Forward panel of the Router tab of the Advanced Settings window, you can:
● Enable
port forwarding for an application. (See “Enabling Port Forwarding for an Application”
on page 106.)
● Re
move an application from the port forwarding list. (See “Disabling Port Forwarding for an
Application” on page 106.)
Notes: Port forwarding creates a security risk. When not required, port forwarding should be disabled.
Port forwarding does not apply to normal browsing, file downloading, running most online games or
other applications hosted on the Internet. (Some online games require port forwarding.)