User guide

20 Getting Your Device Ready
Section 3A
Setting Up Your Device
⽧ Account Setup (page 20)
⽧ Device Setup (page 20)
Account Setup
Normally your device will be set up on your Sprint account at the time of purchase.
To verify that your device is set up on your Sprint account:
1. Log in to your account at www.sprint.com by entering your username and password.
2. Confirm that the Overdrive Pro 3G/4G Mobile Hotspot is on your account with a Mobile
Broadband connection plan.
If you don’t see your device listed, you will need
to contact Sprint Customer Service to complete
setting up the device on your account. (See “Contacting Customer Service” on page 118 .) Have the
following available before calling:
● Y
our Sprint account information.
● The
ESN number of your device (displayed on the packaging and inside the battery compartment).
Device Setup
1. Install the battery, as described in “Installing the Battery” on page 10.
2. Connect the device to the AC charger, as described in “Using the AC Charger with Your Device’s
micro-USB Port” on page 12.
3. Plug the AC charger into an electrical outlet.
4. Important: Charge the device until the battery icon is full ( ).
Connecting to the Network
1. Make sure you are in a Sprint 3G or 4G coverage area (not roaming).
2. If you have a LAN connection, disconnect it.
3. Make sure your computer’s Wi-Fi is turned on.