User guide

28 Using Your Device
Section 4A
Connecting Through USB
● TRU-Install (page 28)
● Requirements for a USB Tethered Connection (page 28)
● Making a Tethered Connection (page 29)
TRU-Install
TRU-Install is a feature that installs the necessary drivers the first time you connect your device to your
Windows or Mac computer through the micro-USB cable. (For details, see
“Making a Tethered
Connection” on page 29.) An installation CD is not required.
TRU-Install is enabled by default.
To change the setting:
1. In the address bar of your Web browser, type http://192.168.0.1 to display the home page.
2. Make sure you’re logged in to the home page (the text “Admin Logged in” is displayed near the
upper left corner of the home page). If you’re not logged in, in the
Admin Login section (in the
upper left area of the home page), enter the administrator password (1–20 characters or
numbers). (The default password is “password.”)
3. Click Advanced settings > Device > Basic.
4. Select a value for TRU-Install.
Requirements for a USB Tethered Connection
Your device supports a direct connection through a USB cable to a Windows or Mac computer. (This
is commonly referred to as a “tethered” connection.)