User guide

Settings 75
Settings
Section 5E
Login Settings
⽧ Changing the Administrator Password (page 75)
⽧ Automatic Login (“Remember Me”) (page 75)
Changing the Administrator Password
Note: If you forget the Admin Login password, you’ll need to reset the device to its default settings and go
through the device setup. (See "What Do I Do if I Forget the Ad
ministrator Password?" on page 121.)
1. Log in to the home page.
2. Click Advanced settings > Device > Basic.
3. In the Admin Password field, type the new password (1–20 letters, numbers, or symbols).
Automatic Login (“Remember Me”)
If you enable automatic login:
● An
yone who uses the computer will automatically be logged in to the home page (as long as
no one else has already logged in from another computer); entering the administrator
password is not required.
● T
he timeout security feature is disabled — you will never be automatically logged off.
To enable automatic login:
1. From the computer that you want to enable automatic login, log in to the home page.
2. In the login area, select the Remember me check box.
You can repeat the above steps on other computers; however, since only one administrator can
be logged in
at a time, only the first person to display the home page will be logged in.
Viewing Computers That Are Set to Automatically Log In as Administrator
1.
Log in to the home page.
2. Click Advanced settings > Device > Basic.
3. Next to Remember me Client List, click show list.
Disabling Automatic Login For a Specific Computer
1.
Log in to the home page.
2. Click Advanced settings > Device > Basic.
3. Next to Remember Me Client List, click show list.
4. In the row for the computer that you want to disable automatic login, click Remove.