User guide

80 Settings
●
Total Bytes — This is the amount of data transferred over the 4G network during the lifetime of the
device.
●
Firmware Version — This is the firmware version of the 4G component of the device.
●
MAC Address — This is the MAC address of the 4G module. Each wireless device has a unique
MAC address (assigned by its manufacturer).
●
Plan Version — This is the version information of your 4G channel plan, which determines the
frequencies to scan and 4G networks to detect.
The window also has buttons to:
● Sa
ve the information to a text file.
● Reset the 3G and 4G
configuration of the device to default settings (Reset Device to Factory
Defaults). (See “Resetting the 3G and 4G Configurations to Default Settings” on page 96.)
Tip: You can view some of the above information on the “About...” LCD information screen. (See “LCD
Information Screens” on page 17.)
Log Panel
1. Log in to the home page.
2. Click Advanced settings ( ).
3. Click Device > Log.
From this window, you can:
● Enable
logging of system events. (See “Enabling and Disabling Logging of System Events” on
page 114 .)
● Export logs. (See “Exporting System Events” on page 114 and “Exporting the Connection History”
on page 113 .)
● Clear logs. (See “Clearing the System Events Log” on page 114 and “Clearing the Connection
History” on page 113 .)
● Enable logging
of connects and disconnects. (See “Enabling and Disabling Logging of Connects
and Disconnects” on page 113 .)
● Set
the method used for time acquisition. (See “Setting the Method Used for Time Acquisition” on
page 115 .)
WAN Tab
Setup Panel
1.
Log in to the home page.
2. Click Advanced settings ( ).
3. Click WAN > Setup.