User guide

Settings 91
Settings
2. Press the power button on the device two times quickly (within a half-second interval).
The information is displayed for approximately 20 seconds. T
o clear the information before that,
briefly press the power button
on the device.
Enabling the Wi-Fi Password Reminder
1. Log in to the home page.
2. Click Advanced settings > Wi-Fi > Security.
3. In the Password Reminder section, select On.
4. Click Save.
Allowing or Denying Computers Access to the Network
The MAC (Media Access Control) filter is used to grant (“whitelist”) or block (“blacklist”) wireless
devices access to the Wi-Fi, 3G, and 4G networks. Access is based on the MAC address of each
wireless device.
MAC filtering can prevent unauthorized wireless de
vices from connecting to your network.
In the
MAC Filter panel of the Wi-Fi tab (Advanced Settings > Wi-Fi > MAC Filter), you can choose
one of three modes:
●
No filtering — All computers are allowed to access the network.
●
Allow all in list — Only computers that are in this list are allowed to access the network.
●
Block all in list — All computers are allowed to access the network, unless they’re in this list.
In any case, a user still needs to provide the correct Wi-Fi password to access the network.
Specifying Computers That Can Access the Network
1. Log in to the home page.
2. Click Advanced settings > Wi-Fi > MAC Filter.
3. In the MAC Filter Mode list, click Allow all in list.
4. Do one of the following:
䡲 If
the computer you want to allow access is currently connected to the Overdrive Pro 
3G/4G Mobile Hotspot, click
List of connected devices. In the row for the computer,
click
Add.
— or —
䡲 Click
Add. In the MAC Address field, enter the MAC address of the computer you’re adding
to the list. (If you don’t know this address, see “Finding the MAC Address” on page 128.)
In the
Name field, enter a name, for example “Amy’s PC.”
5. Repeat step 4 for each computer for which you want to allow access.