Data Sheet
PRODUCT SPECIFICATION
Product Alkaline battery, 1.5 volts
Page 2 of 5
Size LR6, Mignon, AA
Conrad Electronic SE, Klaus-Conrad-Straße 1, 92240 Hirschau, Germany
Tel. 0180/5312111, Fax 0180/5312110, webmaster@conrad.de, www.conrad-energy.de, www.conrad.de
10. Electrical characteristics:
(Test environment:20℃±2,60%±15%R.H)(Load resistance: 3.9ohms, Measure time: 0.3S)
(All samples shall be normalized for a minimum of 8 hours at the above environment prior to measurement)
OCV (V) CCV (V) SCC (A)
Initial
≥ 1.59 ≥ 1.45 ≥ 10
After 12 months storage
≥ 1.57 ≥ 1.43 ≥ 8
Remark: OCV: Open Circuit Voltage; CCV: Close Circuit Voltage; SCC: Short Circuit Current
11. Discharge test (service life) (Test environment: 20℃±2,45%--75%R.H)
LOAD Resistance
10Ω 24Ω 3.9Ω 10Ω 43Ω
1000mA
Daily Period 24h/d
pulse
1h/day 1h/day
1h/d 10s/min, 1h/d
Cut off Voltage 0.9V 1.0V 0.8V 0.9V 0.9V 0.9V
Initial
≥ 19.0h ≥ 43h
≥ 7.0h
≥ 19.0h ≥ 90h ≥ 350times
After 12 months
storage
≥ 18.0h ≥ 40h
≥ 6.5h
≥ 18.0h ≥ 85h ≥ 320times
Application / control
Motor, toy
Tape
recorder
radio
Camera flash
light
Remark: The initial discharge test shall commence within 30 days of manufacture.
The discharge time is the minimum average duration (MAD).
Test quantity: n=9pcs (for per discharge test)
12. Discharge curve:
① 10ohms 24h/d to 0.9V continuous discharge curve (Appendix 1)
② 10ohms 1h/d to 0.9V discharge curve ( Appendix 1)
③ 3.9ohms 1h/d to 0.8V discharge curve ( Appendix 1)
④ 24ohms 15s/min,8h/d to 1.0V discharge curve (Appendix 2)
⑤ 43ohms 4h/d to 0.9V discharge curve (Appendix 2)
⑥ 1000mA, 10s/min, 1h/d to 0.9V discharge curve (Appendix 2)
13. Leakage-proof structure:
① The top seal is made of imported special nylon from DUPONT, has a much stable vent pressure.
② The sealing location of the battery is provided with double beading scores to make the structure tighter.
③ Using imported special sealing glue, with more reliable leakage-proof performance.