Installation Guide
5
POSSIBLE CAUSEPROBLEM
The unit does not work
• A fuse may be blown or the circuit breaker
tripped
• Plug not fully inserted into the wall outlet
Internal temperature not cold
enough
• Temperature setting is too warm
• Door is not shut properly or opened frequently
• Exhaust vent is obstructed
• A large quantity of warm food has been placed
in the unit
• Close proximity to heat source or direct sunlight
• Ambient temperature or humidity is very high
Appliance runs continuously • Temperature setting is too cold
• Door not shut properly or opened frequently
• Exhaust vent is obstructed
•
• Close proximity to heat source or direct sunlight
• Ambient temperature or humidity is very high
Internal temperature is too cold • Temperature setting is too cold
Noises • Parts are expanding and / or the refrigerant is
circulating; this is normal
•
•
•
Doors cannot be closed properly
•
•
A large quantity of warm food has been placed
in the unit
Troubleshooting
Power is not on or the unit is not connected to
power
Low voltage
Floor is not flat, and the unit is not placed in a
stable position.
The door is obstructed by items inside the unit.
The door gasket is not providing a good seal.
Heat the gasket with a hair dryer.