Operating instructions

29
W415-0680 / 04.10.08
FIGURE 80
The fi replace requires a mini-
mum enclosure height of 38 1/2“
(REAR VENT) 49" (TOP VENT).
For temperature requirements,
the enclosure space around and
above the fi replace must be left
unobstructed.
* If this unit is installed fl ush to the fi nishing material
and optional clean face surround is to be installed then
a minimum of 6 1/2" of cement board and steel header
(supplied with surround kit) or non-combustible equiva-
lent must be used on the top only of the front face. See
Figure 80.
** See Venting Section
FIGURE 79
**
FIGURE 81
NOTE:
** Installation requires a minimum 6 1/2" of non-
combustible facing above the top of the fi replace.
FIGURE 82
FIGURE 78
CLEAN FACE SURROUND MINIMUM ENCLOSURE CLEARANCES
BCDV36CF(G) MINIMUM MANTEL AND ENCLOSURE CLEARANCES
FIGURE 77
Combustible mantel clearance can vary according to the
mantel depth. Use the graph to help evaluate the clearance
needed.