Operating instructions

35
W415-0680 / 04.10.08
Remove the backing of the logo supplied and place on the glass viewing door, as indicated.
LOGO PLACEMENT
½"
½"
LOGO
The BCDV36CFG comes equipped with our “Night Light™”. If in the event the lamp or lens
needs to be replaced, follow these instructions.
1. Turn off all electrical supply.
2. Remove the glass and glass ember tray from the fi rebox.
3. Unscrew the lens cover making sure the gasket stays in place.
NOTE: Do not handle the lamp (bulb) with bare fi ngers, protect with a clean dry cloth.
4. The lamp will pull straight out of the socket. Replace with Wolf Steel Ltd. parts only
(W387-0009), as lamp and lens are special "high temperature" products.
5. Replace lens cover.
6. Replace glass and ember tray.
FIGURE 111
Gasket
BCDV36CFG FINISHING
GLASS BURNER INSTALLATION
Spread the clear glass embers (W300-0102) onto the glass ember
tray evenly covering the burner tube (follow natural shape of tray).
FIGURE 110
NOTE: The distribution of clear glass embers over the
burner tube will infl uence the fl ame height.
FIGURE 109
BULB REPLACEMENT
1. Remove the glass and glass ember tray.
2. Remove the burner base from the fi rebox.
3. Compress the retainer fi ns and lift out the lens assembly, disconnect the wires.
4. Replace lens assembly by aligning key hole and snap into place, re-connect wires.
5. Re-install burner base ensuring a good fi rebox seal.
6. Re-install glass ember tray and glass.
The front of the fi replace becomes very hot during operation. Let the fi replace cool completely before conducting service.
NOTE: When removing the glass ember tray make sure the glass embers are away from the center of the screen, exposing the
burner, before lifting glass ember tray out.
When replacing burner, absolutely no glass embers can be in cup surrounding the orifi ce. HINT: If glass falls into cup and sur-
rounds the orifi ce, insert a clean bag into a vacuum cleaner and vacuum out glass embers or replacement glass embers can be
ordered from Wolf Steel Ltd.
LENS ASSEMBLY REPLACEMENT
KEY HOLE
FIGURE 112
!
WARNING