Operating instructions

39
W415-0680 / 04.10.08
BCDV36CFG LIGHT SWITCH / WIRING DIAGRAM
FIGURE 126
A wall switch must be installed in a convenient location for the light operation.
The recommended maximum lead length depends on wire size:
WIRE SIZE MAX. LENGTH
14 gauge 100 feet
16 gauge 60 feet
18 gauge 40 feet
A 20’ length of millivolt wire is connected to the terminal block for the light wall switch. However if a greater length is required
route 2-strand (solid core) wire through the electrical hole located at the bottom left side of the unit.