Refrigerators and Freezers Operation, Installation and Instruction Manual Refrigerators and Freezers

FIGURE 9
LOW-PROFILE,CEILING-MOUNT EVAPORATOR ASSEMBLY
INTERIOR REACH-IN ACCESSORIES
The standard interior accessory package that is supplied from the factory with your
reach-in refrigerator or freezer consists of standard pilaster strips with pilaster clips
(four (4)clips per shelf), three (3) epoxy coated shelves per section, and four (4)
epoxy coated shelves per section on glass door models only.
SHELVING INSTALLATION
Pilaster strips which support the shelving are secured to the cabinet walls with
special pilaster screws which allow the strips to be readily removed for cleaning
without the use of tools. Shelf clips are easily installed by inserting them into the
pilasters at the desired shelf location and shelf installation is as simple as placing
- 17 -