Instructions / Assembly

6
Figure4
B. Pick up one Panel (#1) and,
with the mirror facing you, tilt
the top of the Panel (#1) back
and slip the Panel (#1) into
the back runner of the Top
Channel (#2). Next, set the
bottom of the Panel (#1) into
the back runner of the Bottom
Track (#3).
C. For the front Panel (#1),
repeat B, but place the Panel
(#1) into the front runner of
the Top Channel (#2) and
front runner of the Bottom
Track (#3).
STEP 5 Adjustment of Panels
Slide the front Panel to the side closest to the
room’s entrance door (This is how the Wardrobe
Doorswillbeinpositiontolooktheirbest.).Look
at the space between the door edge and the wall.
You want the door edge and the wall to be flush.
If you see space at the top or bottom edge of the
Panel, turn the adjusting screw on top of the Steel
Wheel Assembly (#13) on the lower back of the
Panel nearest the wall. Turn the screw left or
right until the Panel aligns flush with the wall
(SeeFigure4).
STEP 6 Installing the Clear Bumpers
Peel paper off the back of the Clear Bumpers (#8)
and place on the edge of the Panel frame 30-1/2ʺ
up from the bottom. The Clear Bumpers (#8) will
cushion and protect the door and wall when you
closetheWardrobeDoors(SeeFigure5).
STEP 7 Installing the Handles
NOTE: Serenity™/Tranquility™ door style does not
have Handles.
A. Clean the mirror in the area where the Mirror
Handles (#7) will be applied. Peel paper off the
back of the Mirror Handles (#7). Position each
Handle 36ʺ from the bottom of the Panel (#1) and
1-1/2ʺ from outside edge of the Side Mold (#11)
(1/2ʺ in from the Glazing Vinyl (#16) on each Panel
(#1)(SeeFigure5).
B. If there are three Panels, place two Handles on
the center Panel.
1-1/2ʺ
1-1/2ʺ
HANDLE
BUMPER
BUMPER
36ʺ
36ʺ
Figure5
Thank you for purchasing a Wardrobe Door. If you
like this product, we invite you to visit our website at
www.CwDoor.com for more information about our
extensive line of other Wardrobe Doors, Room
Partitions and Loft Dividers, Cabinet Doors, and
Shower Enclosures. They feature Duratuf
®
Tempered
Safety Glass, Painted Glass, CwShield™ Protective
Coating and Duraflect
®
Copper-FreeMirror.
HANDLE
Aurora™/ Aurora Plus™/ Serenity™/ Tranquility - I3010 - 0115