Owner Manual

5
GETTING STARTED
1. Before plugging in the cooler/warmer unit: make sure the switch on the back of the unit is
set to the OFF setting.
2. A minimum 2” vent clearance is required for proper ventilation.
3. Plugging in your unit:
4. Turning on your unit:
For home application: Use the supplied AC power cord (see Fig. 2) by inserting AC connector
into unit’s AC port (see Fig. 6) and inserting AC plug into wall outlet. This unit ONLY works on 100-
120V (in compliance with North American standards. Unit will sustain damage and warranty will be
void if unit is plugged into a 220-230 volt outlet.
For motor vehicle application: Car engine MUST be turned on first before plugging in the
cooler/warmer. This precaution prevents a power surge that can lead to the unit overheating
and/or becoming a potential fire risk. Use the supplied DC power cord (see Fig. 3) and insert DC
connector into unit’s DC port (see Fig. 6) and the DC plug into the appropriate cigarette-lighter outlet.
For USB application: The Coca-Cola Vintage Chic can also be powered via the supplied USB
power cord (see Fig. 4) using a minimum 2A power bank. Do not use a computer USB port as
they don’t output 2A. When using USB power, the Coca-Cola Vintage Chic 4-liter cooler/warmer
unit operates in ECO mode. It is recommended that you run your Coca-Cola Vintage Chic for
one to two hours at home (using the included AC power cord) or in your car (using the included
DC power cord before switching to USB power.
For Cooling: Set the power switch to the COLD setting. A green light will turn on to indicate that
the unit is in cooling mode.
For Warming: Set the power switch to the WARM setting. A red light will turn on to indicate that
the unit is in warming mode.
Fig. 6
Fig. 7
Vents
COLD/WARM SWITCH DC PORT AC PORT
PRODUCT CHARACTERISTICS
APPLICATIONS
WHAT’S IN THE BOX