Installation guide

www.cooperbussmann.com/BussmannWirelessResources
21
Cooper Bussmann BU-905U-L Wireless I/O Configuration Manual
BU-Config lets you sort the tree view:
• By name – that shows the units in alphabetical order of their unit names; or
• By address – that shows the units in numerical order of their unit addresses.
To sort the tree view:
1. Open the project.
2. Select View » Sort Tree View » by Name (or by Address).
3. BU-Config sorts the tree view:
Sort b
y name
Sort by address
Setting Project Information
BU-Config lets you set the following project information:
Field
Description For more information, see …
Project name Lets you set a name to uniquely identify the project. Setting the project name on page 22.
Project location Lets you set the location on your PC where BU-Config will Setting the project location on page 22.
store the project.
Project password Lets you set or remove a password to help protect the configuration Removing the project password on
file against unauthorized changes. page 28.
System address Lets you group modules in a system. Modules ignore messages Setting the system address on page 23.
from modules not sharing share their system address to prevent
“cross-talk” between modules in different systems.
System security code Lets you set or remove a system security code to help ensure the Encrypting messages by setting a
messages that your network uses remain private. security code on page 24.
For more information, see the next sections.
3A1579Rev1.4