Installation guide

22
www.cooperbussmann.com/BussmannWirelessResources
Cooper Bussmann BU-905U-L Wireless I/O Configuration Manual
Setting the Project Name
BU-Config uses a project name to uniquely identify your system. Each system can have multiple units of different types.
To set the project name:
1. Open the project.
2. BU-Config shows the project name:
3. Change the project name as required. BU-Config shows the new project name:
Setting the Project Location
BU-905U-L stores project information in a “Projects” directory with each individual project stored in a separate directory.
The default project directory is <installation location>\Projects.
For example, C:\Documents and Settings\All Users\Projects.
If you want to change the project location, you must backup the project and then restore the project to the new location.
For more information on backing up and restoring projects, see Backing up projects on page 29 and Restoring projects on page 30.
3A1579Rev1.4