Installation guide

www.cooperbussmann.com/BussmannWirelessResources

Cooper Bussmann BU-905U-L Wireless I/O Configuration Manual

7. BU-Config checks you want to use the security code:

8. Click OK to set the security code or click Cancel to quit without setting the security code.

9. BU-Config sets the security code and shows a message indicating the security code is active:

10. Click OK to acknowledge the message.

Removing the Security Code

BU-Config lets you set or remove a system security code to help keep the communications of your system private and to protect the

system from malicious access (e.g. hacking). For more information on setting the security code, see Encrypting messages by setting a

security code on page 24.

To remove the security code:

1. Open the project.

2. Unselect Enable Security:

3. BU-Config confirms you want to remove the security code:

4. Click OK to remove the security code or click Cancel to return to the previous screen without removing the security code.

5. BU-Config removes the security code:

3A1579Rev1.4