Installation guide

www.cooperbussmann.com/BussmannWirelessResources

Cooper Bussmann BU-905U-L Wireless I/O Configuration Manual

Securing a Project Using a Password

BU-Config lets you set a password (between 6 and 256 characters) to help protect the configuration file against unauthorized changes.

If you set a password, you need to enter the password each time you enter the project to:

• Change - the configuration;

• Download - the configuration; or

• Upload - the configuration.

NOTE - If you do not enter the password you can still view the configuration; however you cannot make changes.

If unauthorized file access is an issue; we recommend you change the password regularly as well as whenever staff changes.

To secure a project using a password:

1. Open the project.

2. Click Project Password .

3. BU-Config shows the Project Password page:

4. Select Enable Password Protection:

5. Enter the password (6 to 256 characters) you want to use for the project and then re-enter to confirm the password.

NOTE - The password can be between 6 and 256 characters long and is case-sensitive. You can enter any ASCII characters (including letters,

numbers, other keyboard characters, etc.).

To ensure the password remains confidential, BU-Config shows a hash character (i.e., “#”) for each letter or number entered; BU-Config never

shows the password in plain text.

6. Click Set Field to set the new value or click Cancel Field to keep the original value and leave the password entry page.

3A1579Rev1.4