Installation guide

www.cooperbussmann.com/BussmannWirelessResources
33
Cooper Bussmann BU-905U-L Wireless I/O Configuration Manual
Creating and Adding a New Unit to the Configuration
To create and add a new unit to the configuration:
1. Open the project.
2. Select the Units branch of the navigation tree:
3. Click Add New Unit or select Unit Options » New Unit.
4. BU-Config shows the Select Unit Type page:
5. Select the unit type you want to add.
6. Click OK to add the new unit or click Cancel to return to the previous screen without adding the new unit.
7. BU-Config checks whether you want to choose the address of the new unit:
8. Click Yes to choose the address yourself, click No to let BU-Config automatically select the address or click Cancel to return to the previous
screen without selecting the address.
9. If you allow BU-Config to automatically select the address it selects the lowest unused unit address.
3A1579Rev1.4