Installation guide

36
www.cooperbussmann.com/BussmannWirelessResources
Cooper Bussmann BU-905U-L Wireless I/O Configuration Manual
3A1579Rev1.4
6. If you allow BU-Config to automatically select the address, BU-Config will choose the lowest unused unit address.
If you choose to set the address, BU-Config shows a page indicating the addresses already used in the system:
7. Select the address and click OK to assign the address to the duplicated unit or click Cancel to return to the previous screen
without duplicating the unit.
8. BU-Config creates a new unit with identical configuration to the selected unit using the new unit address:
9. BU-Config automatically checks the unit configuration and shows any error messages.
10. You can now configure the new unit.