Installation guide

www.cooperbussmann.com/BussmannWirelessResources
37
Cooper Bussmann BU-905U-L Wireless I/O Configuration Manual
3A1579Rev1.4
Reading Configuration from a Module (loading a new unit)
To load a new unit from an already-configured module:
1. Open the project.
2. Connect the module that you want to load to one of your PC serial ports using the Cooper Bussmann RS-232 serial cable.
3. Select the serial port that has the cable connected by clicking on the Com Port field and selecting the appropriate port from the list that
appears (this step can be skipped if the correct serial port is already selected):
4. Click Load a New Unit or select Unit Options » Load into New.
5. BU-Config prompts you for the unit type:
6. Select the unit type you want to load.
7. Click OK to load the new unit or click Cancel to return to the previous screen without loading the new unit.