Installation guide

To set the unit address:
1. Select the unit you want to change.
2. BU-Config shows the unit address:
www.cooperbussmann.com/BussmannWirelessResources
41
Cooper Bussmann BU-905U-L Wireless I/O Configuration Manual
3A1579Rev1.4
3. Select Browse
4. BU-Config shows the list of unit addresses and indicates the addresses already in use:
5. Select an unused address and click OK to set the new address or click Cancel to return to the previous screen without setting the
new address.
6. BU-Config changes the unit address:
7. You can also change the unit name to reflect the new address if required. For more information, see Setting the unit name on page 39.