Installation guide

48
www.cooperbussmann.com/BussmannWirelessResources
Cooper Bussmann BU-905U-L Wireless I/O Configuration Manual
3A1579Rev1.4
4. BU-Config shows the mappings page that contains information on two tabs:
T
ab Example
Mapping
Advanced
5. Set the required information. For more information, see How to configure a mapping on page 49.
6. Click OK to set the mapping or click Cancel to return to the mapping list without creating a new mapping.
7. BU-Config creates the new mapping and displays the mapping in the mapping list.
8. The module will not use the new mapping until you reconfigure it.