Installation guide

56
www.cooperbussmann.com/BussmannWirelessResources
Cooper Bussmann BU-905U-L Wireless I/O Configuration Manual
To set setpoints:
1. Open the project.
2. Select the unit you want to change.
3. Select Setpoints.
4. BU-Config shows the setpoints:
5. Double click the setpoint you want to change or select the setpoint and click Edit Setpoint.
6. BU-Config shows the setpoint:
7. Set the setpoint threshold values as required
8. Set the new value and click OK to save the setpoint or click Cancel to return to the setpoint list without changing the setpoint.
9. BU-Config writes the new setpoint values to the module when you next configure it.
3A1579Rev1.4