Installation guide

64
www.cooperbussmann.com/BussmannWirelessResources
Cooper Bussmann BU-905U-L Wireless I/O Configuration Manual
To set the additional unit detail information:
1. Open the project.
2. Select the unit you want to change.
3. Select Unit Details.
4. BU-Config shows the available unit details including their current values:
5. Double click the setting you want to change or select the setting and click Edit Parameter .
6. BU-Config shows the relevant setting page showing the range of allowable values:
7. Enter the setting information and click OK to change the parameter or click Cancel to return to the detail list without
changing the parameter.
8. BU-Config will write the unit details to the module the next time you configure the module.
3A1579Rev1.4