Installation guide

www.cooperbussmann.com/BussmannWirelessResources
67
Cooper Bussmann BU-905U-L Wireless I/O Configuration Manual
UTILITIES
Utilities provide one-step access to help speed up common tasks.
BU-Config lets you:
If you w
ant to … Description
For more information, see …
Show address mapping Lets you see the addresses allocated to units. Showing the address mapping
on page 67.
Compile the system Lets you check your system configuration, report any errors and Compiling the system
generate configuration files for each unit. on page 67.
Pack the database Lets you compress the database so it takes up less space on Packing/compressing the
your PC. database on page 68.
Load configuration information Lets you transfer the configuration information to a unit. Loading configuration information
in a unit into a unit on page 68.
For more information, see the next sections.
Showing the Address Mapping
BU-Config lets you see the addresses allocated to units.
This summarizes the addresses of each module in a single screen. To change the address of a module, refer to
Setting the unit address on page 40.
To show the address mapping:
1. Open the project.
2. Select Utilities » Address Map.
3. BU-Config shows the list of unit addresses and indicating the addresses in use:
3A1579Rev1.4