Installation guide

72
www.cooperbussmann.com/BussmannWirelessResources
Cooper Bussmann BU-905U-L Wireless I/O Configuration Manual
3A1579Rev1.4
7. Click Yes to factory configuration or click No to select previously stored (i.e., inactive) user configuration. You can also click Cancel to return to
the previous screen without loading either configuration from the module.
8. BU-Config checks the unit address of BU-905U-L-T modules and shows information indicating the new unit will be created with a secondary
unit address as it has the same address as another BU-905U-L-T module:
9. Click OK to continue or click Cancel to return to the previous screen without loading the information.
10. If you load from a module with an address already used by another unit in the configuration, BU-Config shows a message indicates
the problem:
11. Click OK to acknowledge the error and re-check the unit address.
12. BU-Config loads the information and shows a message indicating the load completed successfully:
13. Click OK to acknowledge the message.
14. You can now work with the unit configuration.