Owner manual
烉Manual !! 烉Motion Detection!! 烉Continuous ! 烉Alarm
(
NOTE 1 & NOTE 2).
PEach color distinguishing different recording events, the user may press˪˫or
˪˫button to move the cursor left or right and immediately shows the first
image of the highlighted event on the screen display background.!
QDisplays the time highlighted by the event bar.!
(NOTE 1烉Select the starting point and press˪Enter˫button to playback.
(NOTE 2烉Press˪İɶ
ɶ
˫button to stop playback and the system will return to˰SEARCH
and PLAY˱selection and enables the user to select the prefered input source.
The device supports playback only to images recorded by our device, other ASF video
files are not guaranteed.
5.5 PC Playback
1. The device uses SD card as its main storage. User may read the data stored in the SD
card from the computers that supports SD card reader device.
2. All files (under DVMPG4 folder) has approximate size of 1MB and file names are
ordered according to recorded times (sequence).
File Playback: User may use Microsoft£炼Media Player or DivX炼DivX Player
(http://www.divx.com/) to playback video files.
When first time using Media Player to playback, it requires the most updated decoder
from the Microsoft£ software website.
5.6 SD Card Maintenance
1. The device supports only FAT16/ 32 file system; therefore it is unable to determine
other file systems. Please format the SD card (enter˰MENU/ SD CARD OPTIONS˱
and select “Format”).
2. The system supports only partial SD card file system repair. The system is unable to
detect any file system damage, therefore please format the SD card (enter˰MENU/
SD CARD OPTIONS˱and select “Format”).
5.7 How to Download the Updated Software
1. Use the SD card to update your system firmware.
2. Please follow the steps below to update the software:
(1) Copy the new system firmware into the new directory of the SD card from your
computer.
(2) Insert the SD card; switch off the main power and then restart.
(3) Wait for 5 to 6 seconds, the system update will be complete and return to live mode.
Do not withdraw the SD card while booting, when power-loss occurs while proceeding step
(3), please repeat step (2) and (3).
9