NVMS-5000 NVMS-5000 User Manual
NVMS-5000 User Manual Contents 1 Introduction..................................................................................................................................................................... 4 1.1 NVMS-5000 Brief Introduction ........................................................................................................................... 4 1.1.1 Summerization ......................................................................................................................
NVMS-5000 User manual 4.7 Schedule Settings ...............................................................................................................................................35 4.7.1 Create Schedule ......................................................................................................................................35 4.7.2 Modify or Delete Schedule .....................................................................................................................36 4.7.
NVMS-5000 User manual 1 Introduction 1.1 NVMS-5000 Brief Introduction 1.1.1 Summerization NVMS-5000 which combines video capture devices (including various DVR/DVS/IPC), alarm capture devices (including various alarms and sensors), servers, IP-SAN, clients (including mobile phones) and background monitor (monitor and TV-Wall) is a set of network video surveillance and management software. It is suitable for large, medium and small enterprises to use. 1.1.
NVMS-5000 User manual 1.2 System Components 1.2.1 System 1.2.2 Front-end Access z Front-end devices include IPC, DVR and DVS. z You need to connect monitor devices such as IPC, DVR and DVS to internet through hubs or routers accessed by Cat5 or Cat5e cables (less than 100 meters) or optical fiber. z Run monitor client through local PC to configure the local video monitor, monitor devices and so on. 1.2.
NVMS-5000 User manual NO. Server Function IP address 1 Authentication server Authenticate devices˄including Web˅ 2 Media transfer server Transfer images 192.168.6.68 3 Storage server Image storage 192.168.6.69 4 Alarm server Alarm handling 192.168.6.70 5 Emap server Emap application 192.168.6.71 192.168.6.67 Note˖If servers are installed in the same PC, these servers shall have the same IP address. 1.
NVMS-5000 User manual 2.93GHz or above/4GB DDR3/NV GT430 or AMD HD 6570 or above, above 512MB GDDR5 Memory (recommend 1GB GDDR5 memory) /500GB SATA/100M NIC 2 3 Professional/ Ultimate TV-Wall Server Use 8/4-ch decoder Windows 7/Windows XP 32 bit It is up to the number of the decoding channel and output display screen Config Client TV-Wall Client z z z z Windows XPSP3 32bit Professional /Windows 7 SP1 32bit Professional/Ultimate 1 CPU˖2G or above Memory˖2GB DDR3 HDD˖500GB SATA NI˖1000M 2.
NVMS-5000 User manual 3 Install and Uninstall the Software 3.1 Install the software 1˅Find the “setup.exe” file in the DVD disk. A welcome interface will pop up by double clicking it. Now click ‘ Next ’ button.
NVMS-5000 User manual 5˅Select features and then click ‘ Next ’ button. 6˅It will pop up “Microsoft Visual C++ 2008 Redistributable Setup” wizard. If it is not installed in your PC, the following interface will pop up. Click ‘ Next ” Æselect “ I have read and accept the license terms ”Æclick ‘ Install ”. 7˅Click ‘ Finish ’ button to complete.
NVMS-5000 User manual 8˅ Return to the installation interface of NVMS-5000 to review settings. Then click ‘ Next ’ button. 9˅ Select “Create shortcut in desktop” as needed and then click ‘ Finish ’ button. Now the NVMS-5000 installation is completed. 10) After you finish installing NVMS-5000, a wizard for Apache HTTP Server pops up. If you want to access web client, please click ‘ Next ’ button to install. 10˅Select “I accept the terms in the license agreement” and click Next to continue.
NVMS-5000 User manual 11) Read the information of Apache HTTP Server and then click Next . 12˅Set the server information as shown below. The information inputted below is for reference only. It is recommended to choose port 80as a service. Then click Next to continue. 13˅ Select the installation type. Options: Typical, Custom and Custom. Then click “Change...” to assign the path to install and click Next to continue.
NVMS-5000 User manual 14˅Click Install to install the program. 15˅Click Finish to complete the installation wizard of Apache HTTP Server.
NVMS-5000 User manual 3.2 Uninstall the software If the new version needs to be installed or there is no necessary to use this software, you can uninstall this software. We strongly recommend that you back up your configuration data before you install the new version of NVMS-5000. The methods of uninstallation are as follows: Click ‘Start’ ÆProgramsÆNVMS-5000ÆUninstall to pop up the following wizard. Click ‘Yes” to confirm. Then click ‘Finish’ button to completely uninstall this software.
NVMS-5000 User manual Click icon to pop up the dropdown list through which you can view the version of servers, change the web server port and set up login and maintenance and server parameters. Click Change the web server port to modify the web server port. The default port of Web Server is 8088. To start the software automatically after Boot, click Server start and maintenance configuration and check ‘Software Auto Startup after Boot’.
NVMS-5000 User manual reboot. 4.2 Config Client Config Client can configure all resource approved by Authentication Server, including devices, users, media servers, storage servers, alarm server and TV walls. After starting the authentication server, please run Config Client to create servers, add front-end devices and configure the whole system. Double click icon (or click ‘Start’Æ ProgramsÆNVMS-5000ÆClientÆConfig Client) to run Config Client. A login window will pop up as shown below.
NVMS-5000 User manual z If the authentication server runs in LANˈplease input the LAN IP address and port of the authentication server. z If the authentication server runs in WAN, please input the WAN IP address or select ‘Domain’ to input the domain name and port of the authentication server. After inputting all information, please click ‘OK’ button and then click ‘Close’ button to return to the login window. Then click ‘Login’ button to enter into the Config Client interface.
NVMS-5000 User manual Wall and Schedule as well as modifying Alarm Server and E-Map Server. Account and Permission interface includes creating, modifying or deleting account and user group as well as user permission. System and Security interface includes system backup and restoration. 4.3 Device Settings Create area and add or delete device. 4.3.1 Create area In the Configuration Panel Home, enter into the device and server configuration interface by clicking ‘Device and Server’.
NVMS-5000 User manual To pop up an area creation window, click ‘Create Area’ button. Then input new area name to create the upper area. After that, please click ‘OK’ button to save settings. To create the lower area, please click ‘Create Area” and then choose the Upper Area and input the area name. After that, click ‘OK’ button to save settings. If you want to create another upper Area, please don’t choose the upper area. Input the area name directly. Then click ‘OK’ to save settings.
NVMS-5000 User manual 4.3.2 Add Device Select the created area and click ‘Add Device” to add device to this area as shown below. There are three ways to add device. z Input Device Information Manually In device creation interface, input the device information as shown below. If the media server doesn’t create in advance, please click ‘Create Media Server’ to create media server as shown below.
NVMS-5000 User manual After you create the media server, please return to the device creation interface to select a media server and then click ‘Create Device’ button to add the device. z Search Online Device In device creation interface, a device list will pop up by clicking “Search Device” button. The device IP address, port and MAC address automatically on the same network area will list on the Search Device window.
NVMS-5000 User manual Select area and media server and input device name, device number, channel count, sensor count and alarm out count. You also need to configure the network of the device before the auto report takes effect (Please see the network configuration chapter of the device user manual for the detail configuration). After adding the device, return to the device configuration interface. Now you can see the information of the device listed as below.
NVMS-5000 User manual 4.4 Media Server Settings Media server is in charge of the video signal receival of the front-end devices and transfers the signal to the client to preview or to the storage server to record. The client or storage server sends the command of viewing the video of the front-end devices that is also transferred by the media server to the front-end devices. 4.4.1 Create Media Server Before creating devices, please create media server first.
NVMS-5000 User manual 4.4.2 Modify Device of the Media Server In the configuration interface of the media server, to see the device information, click button. Then select the media server and the device of this media server and drag the device to another media server. When the cursor becomes a green cross, release the mouse. Now, a dialog box will pop up to ask whether to drag the device. Please click ‘OK’ button to confirm the modification. 4.4.
NVMS-5000 User manual You can aslo check ‘Auto Login’ or ‘Startup’ button to set the logging method next time. Auto login means the server will auto login and there is not neccessry to input in the filed of server name, password and authenticaiton when you start this server. Startup means the server will auto start when you start you PC. The media server interface is as shown below: If you want to stop media server, please click ‘Stop Service’ button. A window will pop up to ask for password.
NVMS-5000 User manual Enter into the configuration interface of the storage server as shown below. Click ‘Add Media Storage Server’ to display a dialog box as shown below. Input the storage server name and password and then click ‘OK’ to create a storage server. Return to the configuration interface of the storage server. If you want to modify the created storage server, please select the storage server and click ‘Modify’ button to change the name and password.
NVMS-5000 User manual Method 2˖ Enter into Configuration Panel HomeÆ Add Channels to Storage Server interface as shown below. Steps: First, select storage sever. Second, select channel. Third, click icon to add the channel to the storage server. Finally, click ‘OK’ button to save settings. If you want to add all channels of a device to a storage server, please select the storage server and then select the device name and icon.
NVMS-5000 User manual Put the cursor on the schedule name to see the schedule. The default schedule is “7×24”. You can click this schedule and then click ‘OK’ button to save settings. You can also click ‘Create Schedule’ button on the left menu bar to set other schedules (please refer to Chapter 4.7.1 Schedule Settings for detail information). 4.5.4 Start Storage Server Double click icon ˄or click ‘Start’ Æ Programs Æ NVMS-5000 Æ Server Æ Storage Server˅ to run storage server.
NVMS-5000 User manual The storage server interface displays as below. Partition Status: Check the information of disks. Click ‘Refresh’ button to refresh disk information. Format the Disk˖ ˖You can format disks. Before formatting, you shall click ‘stop service” to stop the service of storage server first. You should input the password of this server when you stop or start service. Then select the disk to format. Finally, click ‘Format’ button.
NVMS-5000 User manual For example, when the device is under schedule record condition, the recording status will display as below. 4.5.5 Partition Group Settings of Storage Server Partition group which is comprised of disk partitions stores record data of different devices. Storage server must be started before setting partition group. In the Device and Server interface, click ‘Partition Group Settings of Storage Server’ button.
NVMS-5000 User manual You can also set a cache partition by checking “Set to cache partition”. 2˅ ˅Modify Partition Group Return to Partition Group Settings interface. Select partition group and click ‘Modify Partition Group’ button to modify this partition group. 3˅Add or Remove Channel from Partition Group Select partition group and click ‘Add or Remove Channel from Partition Group’ button. Add channel to partition group: Select channels of area 2 and click button to add.
NVMS-5000 User manual 4.6 Alarm Server Alarm server is in charge of receiving and recording alarm information of connected devices and then sending the alarm information to the relevant user terminal system or devices in accordance with prior alarm settings. 4.6.1 Alarm Server Setting There is only one alarm server in NVMS-5000 system and the system has already created an alarm server named AlarmServer. The default password is null. When logging into the alarm server, no password needs to input.
NVMS-5000 User manual Click ‘Modify name” and “Modify password’ button to change the name and password of the alarm server. 4.6.2 Alarm Tirgger Settings In the configuration interface of the alarm server, click ‘Alarm Trigger” to enter into alarm trigger interface. Select the device and click ‘Add Trigger”. Trigger Record: Select a channel, click ‘Select Channel’ button under the title of Trigger Record and then select the trigger record channels. After that, click ‘OK’ to save the selected channel.
NVMS-5000 User manual Trigger Big Screen: Select a channel, click ‘Select Channel’ button under the title of Trigger Big Screen and then select the trigger record channels. After that, click ‘OK’ to save the selected channel. Finally, click ‘OK’ button in the alarm trigger interface to save all settings. Finishing setting, you can see all alarm trigger information in the alarm trigger interface. To modify the alarm trigger information, please select the relevant channel and click ‘modify’ button.
NVMS-5000 User manual If you want to delete the set schedule, please choose the schedule and click ‘Remove’ button to delete it. 4.6.4 Sensor Alarm Schedule Setting Click icon to return to the configuration interface of the alarm server. Select “Sensor Alarm Schedule Setting’ button and do the relevant settings. Please refer to Chapter 4.6 Motion Alarm Schedule Setting for more details. Note: If no motion alarm schedule or sensor alarm schedule is set up, the default schedule (7×24) will be used. 4.6.
NVMS-5000 User manual Alarm Status: Clicking the tab of “Alarm Status” can see the alarm status of devices. 4.7 Schedule Settings Return to Configuration Panel Home. Enter into Device and ServerÆSchedule interface. In this interface, you can create, modify or delete schedule and set schedule for all applications. 4.7.1 Create Schedule Enter into the Schedule configuration interface. There is a default schedule (7×24). You can also create other schedules.
NVMS-5000 User manual 1 Manually input the start time and end time of the whole week. 2 Manually input the start time and end time of one day. 4.7.2 Modify or Delete Schedule 1) Modify Schedule Enter into the schedule configuration interface. Select the schedule and click ‘Modify’ button as shown below. Select “Modify Schedule Name” to help you modify the schedule name. Select “Modify Schedule Time” to help you modify the schedule time. After clicking “Modify Schedule Time”, the schedule will pop up.
NVMS-5000 User manual 2) Delete Schedule Enter into the schedule configuration interface. Select the schedule you want to delete and then click ‘Delete’ button. 4.7.3 Set Shedule for All Applications Click icon to return to Device and Server configuration interface. Click ‘Set Schedule for All Applications’ button to set record schedule, motion alarm schedule and sensor alarm schedule. 4.
NVMS-5000 User manual Input the name and password of the TV Wall Server and then click ‘OK’ button. As for the created TV Wall Server, you can click ‘Modify’ button to change its name and password and click ‘Delete’ button to delete the TV Wall Server. 4.8.2 Install Video Decoding Card In order to decode video and display video on the wall, user must install video decoding card in the computer.
NVMS-5000 User manual Step 3: Right click ‘My computer’ and then click ‘Manage’ Æ ‘Device Manager’ to unfold ‘sound, video and game controllers’ to check whether there are decoding cards listed or whether the decoding card displays well. If the number of decoding cards is wrong or there is question mark, please re-install the driver software. 4.8.3 Start TV Wall Server Double click icon (or click ‘Start’ Æ ProgramsÆNVMS-5000 Æ ServerÆTV Wall Server) to run the TV Wall Server.
NVMS-5000 User manual To create map or modify the map, you must start the E-Map Server. 4.9.2 Start E-Map Server Double click EMap Server icon (or click ‘Start’ Æ ProgramsÆNVMS-5000 Æ ServerÆEMap Server) to run the EMap Server. A login window will pop up as shown below. Please input the name and password of the TV Wall Server and then click ‘Setup’ button to input the relevant information about Authentication Server (Please refer to Chapter 4.2 Config Client).
NVMS-5000 User manual Input the map name, click ‘Browse’ button to find the map you want to add, double click the map file and click ‘OK’ to save settings. 4.9.3 Modify Map & Add Hotspot and Hotzone Enter into the Configuration Panel Home Æ Device and Server Æ EMap server interface and click ‘Modify Map and Add HotSpot and HotZone’ button. Click the map display area, scroll the mouse wheel to zoom in the map and click map.
NVMS-5000 User manual box will pop up as follow: Step 2: Click color box Step 3: Click to select text color displaying under the hotzone icon. icon to choose the hotzone icon displaying on the map. Step 4: Check the associated map. Step 5: Click ‘OK’ button to save settings. The hotzone icon can be moved anywhere. To switch to the designated map, click this icon. If you delete or modify this hot zone, you can right click and select ‘Delete’ or ‘Modify the properties’.
NVMS-5000 User manual You can drag the hotspot icon anywhere. Please move it to the right position on the map according to the actual position of the camera. Right click the hotspot to delete or modify the hotspot. Step 6: Adjust the position of the hotspot and then click ‘Save’ button on the menu bar. 4.10 Account and Permission NVMS-5000 user consists of operator and administer. The permission of administer cannot be modified. Only the permission of the operator can be set. 4.10.
NVMS-5000 User manual 4.10.2 Add User Group Enter into User account interface to click ‘Add User Group’ button. Input the user group name and click ‘Create User Group”. 4.10.3 Modify User Permission If the added user is an operator user, you can modify the permission.
NVMS-5000 User manual The permission includes system permission, device permission and TV Wall Server permission. Steps: ¾ Click ‘Add Resource’ button to pop up a dialog box. Select the area, device or channel you want to add. Finally, click ‘OK’ to add a new permission list. ¾ Drag the scroll bar down to set TV Wall Server permission. You just need to select the relevant TV Wall Server and then click ‘OK’ to save the setting. You must have already added TV Wall Servers before permission settings.
NVMS-5000 User manual The user must register in this software for using this function. If you don’t register, you cannot backup or restore the configuration here. Export system configuration: enter into Configuration Panel Home Æ System and Security interface and click ‘Backup System Config”. Click ‘Browse” to select the storage path, input the file name and then click ‘OK’.
NVMS-5000 User manual the authentication server, media server, storage server and alarm server is started, can you start monitor client to view real-time video, record and alarm information. 5.1.1 Start Monitor Client Before starting monitor client, you must start authentications server, media server, storage server and alarm server first. Double click (or click ‘Start’ÆProgramsÆNVMS-5000ÆClientÆMonitor Client) to run monitor client. A login window will pop up as shown below.
NVMS-5000 User manual There are five areas in the main interface of this software. The descriptions of each area are as follows˖ Area Description Area Description 1 Function Area 2 Tab Bar—to display the operated functions 3 Menu Bar 4 Alarm Information List. 5 Status information list Description of Menu Bar Menu Start View System Help Description Export the control panel, live preview, playback tab and lock or exit the client.
NVMS-5000 User manual Descriptions of Other Buttons Button Description Click to hide the window Click to zoom in/out the window Click to exit the window Click to extend or shrink the window (eg. Extend or shrink the list of alarm information list) 5.1.2 Group and Scheme Setting z Channel Group Setting In monitor client control panel interface, click “Virtual Matrix” to pop up the following window. Click “Create Channel Group” to create a channel group.
NVMS-5000 User manual Then click “Add or remove channel or channel of channel group. Check cameras on the left and click on the right, then click z button to add the selected cameras to the group on the right. Check cameras button to remove them from the group. Group Dwell Scheme Setting In Virtual Matrix interface, click the shortcut menu “Modify or Delete Group Dwell Scheme” on the left hand. Click “Create Scheme” to create a group dwell scheme.
NVMS-5000 User manual Buttons description of live preview: Toolbar on the display window: Icon Description Close image Icon Start/stop talk Description Snap PTZ control. Clicking the icon will display the control panel of PTZ.
NVMS-5000 User manual To start the live preview, drag the cameras from the list to the right display window or select a window and double-click the camera to display the live image. You can drag the image to any window at random. Note: Node unfold rule: After the first time for setting the device and area, you shall obey the following rule to view all tree nodes: when the tree node is more than 64 nodes, the system will unfold the upper node by default.
NVMS-5000 User manual ¾ Stop Channel Group or Group Dwell Scheme Click icon to close all the windows for stopping channel group or scheme dwell. z Preview Control ¾ Full Screen Click icon on the display window or right-click to choose “Full Screen” to view in full screen. Right-click to choose “Exit Full Screen” to exit full screen preview. ¾ Single Channel in Full Screen Double click the selected window to view in full screen. Double click again to recover the window.
NVMS-5000 User manual ¾ Snap Click button on the toolbar of the selected channel or right click to choose “Snap” to capture the pictures. After snapping pictures, a message prompt box will pop up to remind you the pictures are captured successfully and where the pictures are stored. Note: Capturing pictures can be realized only in live preview or playback. ¾ Talk button on display window or right click to pop up a menu bar. Click Choose “Start Talk” to enable bidirectional audio.
NVMS-5000 User manual z Alarm Preview Setting In the control panel, click “Alarm Page Settings under Live Preview to pop up the window ķ Alarm preview will pop up automatically when alarm is triggered if checking “Automatic Pop-up Alarm Page”. ĸ Alarm preview will pop up automatically in full screen when alarm if triggered if checking “Full Screen Display When Popping Up”. Ĺ Choose a display monitor from the “Full Screen Display” drop-down menu.
NVMS-5000 User manual 5.1.6 Playback In the interface of control panel, click “Playback” to enter the interface. You can play back the record files stored in the HDD of device and storage server.
NVMS-5000 User manual Area Descriptions: Area 1 3 5 Description Playback Area Record time Area Time search or type search Area Area 2 4 Description Toolbar Resources Area Buttons Description of Area 2 Icon Description Screen mode. 1,4,9,16,25 channels are optional Close playback of all channels Full screen Play Pause Stop Playback by single frame. When playback, click and then click this button to play frame by frame. Backup the start time button firstly Backup the end time Download Event list.
NVMS-5000 User manual In the timeline, green bar stands for manual record data; yellow bar stands for motion record data; blue bar stands for schedule record data; red bar stands for sensor record data. 5.1.6.1 Playback Mode z Playback by Setting Time Right click the color bar to select “Set the Play Time of the Channel X” and then a dialog window pops up. Input time manually or click z button to select time. The system will play the video from the time you set.
NVMS-5000 User manual 5.1.6.4 Download Record z Download Record by Time Search Right click the image in the playback interface to pop up a drop-down list as shown on the left hand. Click “Download By Time” to pop up a window as follows: Select record channel, start time and end time, checkmark event type and then clickǏRecord Searchǐbutton to search record information. After the information is searched, a backup information window will pop up by clicking ǏDownloadǐbutton.
NVMS-5000 User manual parameter. The real time image will display when you click one channel. You can set the parameter of this channel like the parameter of image, record, motion detection, video loss alarm and PTZ. Different device settings will be displayed for different device. You shall configure it according to its user manual. Camera Basic Setting In monitor client, click “Camera Basic Setting” to pop up the following device settings.
NVMS-5000 User manual Click ‘Clear All Alarm’ to clear the current all alarm. Click ‘Tile’ button to unfold all alarm images as shown below. Click ‘Pile’ button to pile all these images. Click button to tile the alarm preview windows on the right side. 5.1.9 System Log Enter into the monitor client interface and click ‘ System Log’ button to see the following tab. You can check all kinds of logs and export these logs.
NVMS-5000 User manual Select the main type and sub type, start time and end time and then click ‘Search’ button to see the relevant log information. If you need to export the log information, you can click ‘Export’ button after you search the relevant log information and then click ‘Browse’ button to find the export path. Finally, click ‘OK’ button to export those log to the designated folder. 5.1.10 Basic Setting Click “Basic Setting” on the monitor client to pop up the following window.
NVMS-5000 User manual 5.2 Web Client 5.2.1 Operating Environment of Web Client The web client supports IE 8/IE9/IE10, Firefox or Google browser. Please make sure that your browser supports the downloading and use of the Web Client. Checkup whether the IE browser prohibits Active X control from downloading: Open IE browser, click ‘tools”, click ‘Internet Options”, select “Security” and click ‘Custom level…” to pop up a security settings window.
NVMS-5000 User manual Click Playback tab to see the playback interface. Select the play screen in the playback area and click button beside the camera name. This will take you to see the image. The operation steps of this IE monitoring interface are similar to that of the monitor client. Please refer to relevant chapter for details. 5.3 TV Wall Client 5.3.1 Start TV Wall Client Authentication Server, Media Server and TV Wall Server must be started first.
NVMS-5000 User manual normally displayed on the TV Wall Screen. Double click icon (or click ‘Start’ Æ Programs Æ NVMS-5000 Æ Client Æ TV Wall Client) to run the TV Wall Server. A login window pops up as shown below. Input the username and password created below. Then click ‘Setup’ button to input the relevant information of authentication server (please refer to Chapter 4.2 Config Client for more details). Finally, click ‘Login’ button to enter into the TV Wall Client interface.
NVMS-5000 User manual 5.3.2 TV Wall Output Left press the output name and drag them to the TV Wall Area one by one. Then select a screen mode, click ‘Resource browse” (or click ‘ Channel Group’ or click ‘Playback’) and drag channel (or channel group) to one screen as shown below. Click ‘ ” and then the live images will be displayed on the TV Wall Server. The following pictures are the sample pictures displayed on the TV Wall.
NVMS-5000 User manual ¾ Note˖ ˖Please make sure that Authentication Server and Media Server have run and TV Wall Client has been set well and devices have connected well. Then the TV Wall Server can display images normally.
NVMS-5000 User manual 5.3.4 Setup In the TV Wall Client, you can set up channel group and import and export settings. Please enter into TV Wall Client and click ‘Setup’ button to display the following window: 5.3.4.1 Create or Delete Group Dwell Scheme Enter into TV Wall ClientÆ Setup interface. Click ‘Virtual Matrix’ button to pop up a window as shown below: Channel group setting steps: 1. Click ‘Create Channel Group’ button to create a channel group.
NVMS-5000 User manual 2. Select a channel group and click ‘Modify’ button. 3. Select ‘Add or remove channels in the channel group to pop up the following left window. Select the channel in area 2 and then click icon to add the channel to group. Select the channel in area 1 and click icon to remove the channel from the group. 4. Click ‘OK’ button to save settings. If you want to delete the created group, please select this group and click ‘Delete’ button to delete.
NVMS-5000 User manual Step 1: In the Scheduled task interface, click ‘Create Task’ button to display the dialog box as shown above on the right. Step 2: Input the task name. Step 3: Select the trigger mode and time. Step 4: Select the output target and channel or channel group. Step 5: Checkmark ‘Enable’ and click ‘Create a task’. 5.3.4.3 Backup & Restore Settings of TV Wall Client Enter into TV Wall Client Æ Setup interface. Click ‘Export Settings” to backup the settings of TV Wall Client.
NVMS-5000 User manual 2˖ ˖Unable to login IE client A˖1˅ Please checkup whether the Active X control is forbidden to download and refer to the operating environment in Chapter 5.2.1. 2˅Please checkup whether the IP address input in the browser address bar is right. Suppose the LAN IP address of the authentication server is 192.168.6.67ˈWAN IP address is 58.251.86.194ˈ domain name is renzheng.meibu.com and Web port is 8088. If logging in to the IE client in LAN, please input http://192.168.6.
NVMS-5000 User manual cannot save. A˖1˅Please checkup whether channels of devices are added to the storage server. 2˅Please checkup whether the partition groups are set for the storage server. ˖After the device is changed, it still cannot record when re-logging in to the storage server. 10˖ A˖ Please login the config client to reset the partition of the storage server. You must reset the partition group of the storage server after changing PC because the different PC maybe have different partition group.
