Manual

NVMS-5000 User manual
42
box will pop up as follow:
Step 2: Click color box to select text color displaying under the hotzone icon.
Step 3: Click icon to choose the hotzone icon displaying on the map.
Step 4: Check the associated map.
Step 5: Click ‘OK’ button to save settings.
The hotzone icon can be moved anywhere. To switch to the designated map, click this icon. If you delete or
modify this hot zone, you can right click and select ‘Delete’ or ‘Modify the properties’.
Step 6: Adjust the position of this hotzone icon and then click ‘Save’ button to save hotzone.
z Add Hotspot
The position of the monitor can be displayed on the map by adding hotspots so that the position of cameras and
alarms can be vividly shown. The setting steps are as follows:
Step 1: Select the map on the right hand and click ‘Add HotSpot’ button on the menu bar.
Step 2: Select the text color of the hotspot.
Step3: Input the hotspot name and select the associated camera.
Step 4: Click icon to select the hotspot icon.
Step 5: Click ‘OK’ button to save settings.