Manual

NVMS-5000 User manual
47
the authentication server, media server, storage server and alarm server is started, can you start monitor client to view
real-time video, record and alarm information.
5.1.1 Start Monitor Client
Before starting monitor client, you must start authentications server, media server, storage server and alarm server
first. Double click (or click ‘Start’ÆProgramsÆNVMS-5000ÆClientÆMonitor Client) to run monitor client.
A login window will pop up as shown below. Please input user name and password created in Chapter 4.9. Then click
‘Setup’ button to input the information about authentication server (please refer to Chapter 4.2 Config Client for detail
information). Finally, click ‘Login’ button to enter into Monitor Client interface.
¾ Note˖
˖
One user can only login to one client. For example, user1 who has already logged in to Config Client
cannot login to Monitor Client at the same time. If user1 wants to login to Monitor Client, he needs to exit
Config Client first and then log into Monitor Client.
If you login to the Monitor Client for the first time, you should choose the stream before you log in. Please select it
according to the actual condition of your camera.
After logging in to the monitor client, the following interface shows.