Manual

NVMS-5000 User manual

¾ Note˖

Please make sure that Authentication Server and Media Server have run and TV Wall Client has

been set well and devices have connected well. Then the TV Wall Server can display images normally.

Button explanations of output interface:

Button

Function

Lock or unlock the output status of channel

Screen mode

Play/Stop

Stop

Turn off all channels

Turn off the current video output

Save the video output scheme: After dragging channels or channel groups to the output mode, click

button to pop up a dialog box. Input the file name and click ‘Save’ button as shown in the following picture. Then the

file name will be listed in the output scheme area.

If this output scheme is needed, double click the file name and then click button. The images

will display on the TV Wall Server. Right click this output scheme to pop up a dropdown list . Click

‘Rename” to modify the file name. Click ‘Delete” to delete this scheme. Click ‘Clear All” to clear all output schemes.

If you change the channels or channel groups of the current output scheme, clicking button can save

the modified scheme on the output scheme area.

Note: Each time you change channels or channel groups, please click ‘ ’ button to display the

images set currently on the TV Wall.

5.3.3 Playback

Click “Playback” tab to enter playback setting interface. Here it can only playback the record saved in the device

HDD(s).

To playback, select the date and event (like sensor record, motion record., etc) you want to playback and then drag the

channel into the output screen which will display “playback xxx” as shown below. After that, you will see the playback

images on the TV Wall. Please don’t click “Update” button on the tool bar after dragging the channel into output

screen, or the playback images will not display.