User guide

This is a GP style controller, it is held in
place by two clips at the rear.
This is the new RDM controller, it is held
in place with two screws at the rear.
This is the Pegasus style controller.
Display PCB is held in place by four pins
that are welded to the stainless steel
control panel.
The Display PCB is protected by a grey
adhesive membrane (label) which has a
window for the temperature display.
FROM
PART NUMBER AND
DESCRIPTION NOTES
OUR REF.
NUMBER
ELM
191261-LT HONEYWELL/ELM GP LOW TEMP CONTROLLER PRE 2002
37 0 7400053
ELM 191260-HT HONEYWELL/ELM GP HIGH TEMP CONTROLLER PRE2002
37 0 7400052
ELM 190937 HIGH TEMP PEGASUS CONTROLLER (PCB) PRE 2002
37 0 7400028
ELM 190937 LOW TEMP PEGASUS CONTROLLER (PCB) PRE 2002
37 0 7400029
ELM BLACK BOX DISPLAY USED FOR PEGASUS PRE 1994
37 0 7400024
ELM 190966 PEGASUS DISPLAY PRINTED CIRCUIT STRIP PRE 2002
37 0 7400030
ELM BLACK PROBE
37 0 7400025
ELM RED PROBE
37 0 7400026
GREY TEMPERATURE PLAQUE -18/-22 (used with Pegasus display1994-2001)
PRE2002 37 0 7700030
GREY TEMPERATURE PLAQUE +1/+5 (used with Pegasus display 1994-2001) PRE 2002
37 0 7700029
GREY TEMPERATURE PLAQUE CHILL -2/0 (used with Pegasus display 1994-2001)
PRE2002 37 0 7700031
GREY TEMPERATURE PLAQUE MEAT +2/0 (used with Pegasus display 1994-2001) PRE 2002
37 0 7700032
OLD BLUE PLAQUE -18/122 PRE 1994 37 0 7700103
OLD BLUE PLAQUE + 1/4 PRE 1994 37 0 7700110
OLD BLUE PLAQUE BLANK
PRE 1994
37 0 7700105
OLD BLUE PLAQUE CHILL +2 /0
PRE 1994
37 0 7700104
OLD BLUE PLAQUE MEAT -2/0
PRE 1994
37 0 7700101
RDM DIN CONTROLLER LOW TEMP NOW
37 0 7400071
RDM DIN CONTROLLER HIGH TEMP NOW
37 0 7400070
TP002KR DEFROST PROBE NOW
37 0 7400026
TP002K AMBIENT PROBE NOW
37 0 7400025
(NOTE THE PROBE'S ARE INTERCHANGEABLE WITH
EACH CONTROLLER AND HAVE THE SAME PART No.)