WALL MOUNT RANGE HOOD This manual is made with 100 % recycled paper. Electronic version of this manual is available at: www.cosmoappliances.
Thank You Thank you for your purchase. We know that you have many brands and products to choose from and we are honored to know that you have decided to take one of our products into your home and hope that you enjoy it. Our appliances are designed according to the strictest safety and performance standard for the North American market. We follow the most advanced manufacturing philosophy. Each appliance leaves the factory after thorough quality inspection and testing.
STAINLESS STEEL BAFFLE FILTERS About Your New Filters Stainless Steel Baffle Filters do not need linings or mesh inside of the filters and are completely constructed out of stainless steel. The stainless steel construction allows them to be used again after being cleaned or going through the dishwasher. How do Baffle Filters Work? They function by forcing the grease filled air to quickly and continuously change direction as it passes through the filter.
TABLE OF CONTENTS PARTS DIAGRAM INSTALLATION REQUIREMENTS 04 06 INSTALLATION PROCEDURES 07 OPERATING INSTRUCTIONS 10 MAINTENANCE TROUBLESHOOTING WARRANTY AND SERVICE 11 12 13 3
PARTS DIAGRAM 668A 750/900 - 668AS 750/900 11.8" 11.1 " 14.5" 20.7"-36.4" 9.1" 18.7 " 30"/36" MAIN PARTS 1. Inner chimney cover 2. Outer chimney cover 3. Exhaust pipe 4. Blower Assembly 5. Tempered Glass 4 6..
PARTS DIAGRAM 63190FT 750/900 - COS-631 750/900 7.3 " 26.8" - 41.7" 8.4" 1.60" 10.77" 7.48" 18 .9" 30" / 35" MAIN PARTS 1. Inner chimney cover 2. Outer chimney cover 3. Exhaust pipe 4. Stainless Cover 5.
INSTALLATION REQUIREMENTS 25" to 35" 1. Do not install the range hood where there are many open doors or windows.This will cause reduced performance. (Fig. 1) 2. Install the range hood right above the cooktop. The optimal distance between the cooktop and lower edge of the range hood is 25” to 35”. (Fig. 2) 3. In order to get optimal performance, do not over extend the exhaust pipe and avoid unnecessary bending. (Fig. 3) 4. After hanging the unit on the wall, ensure the range hood is straight and leveled.
INSTALLATION PROCEDURES CAUTION: HOOD MAY HAVE VERY SHARP EDGES; PLEASE WEAR PROTECTIVE GLOVES WHENEVER IT IS NECESSARY TO REMOVE ANY PARTS FOR INSTALLING, CLEANING OR SERVICING. Step 1: Place the range hood on the wall and mark the position where you want to install. A height of 25” to 35” is recommended for optimal performance. 0.50" Step 2: Step 3: Find the exhaust pipe, attach it to the top air outlet. Make sure it is connected tightly to the air outlet. 7 9.1" 14.5" A.
Mounting Bracket Step 4: Find the bracket. Match the holes of the inner chimney cover and screw mounting bracket on with type M4 screws. Inner Chimney Cover Step 5: Insert the inner chimney cover into the outer chimney cover. Note that the inner chimney cover must slide into the outer chimney covers orientation slot. Outer Chimney Cover Inner Chimney Cover Outer Chimney Cover Step 6: Attach outer chimney cover to the unit body with type M4 screws. Step 7: A.
Step 8: Extend the exhaust pipe to the vent-pipe of your building or to outside. For optimal performance try to have the least amount of bending possible. Step 9: Insert and install filters according to the diagram.
OPERATING INSTRUCTIONS Push Button Controls 668A 750 / 900 - 63190 / 63175 - 63175E / 63190E A. Light. Press to turn light on / off. B. Highest Fan Setting C. Medium Fan Setting D. Lowest Fan Setting E. Power Button. Press to turn unit on / off. Soft Touch Controls 668AS 750 / 900 - 63190S / 63175S A. Light. Press to turn light on / off. B. Timer Button C. Display Panel D. Fan Speed Button E. Power Button. Press to turn unit on / off.
MAINTENANCE CAUTION: NEVER PUT YOUR HAND INSIDE OF THE UNIT WHILE ITS OPERATING. FOR THE BEST PERFORMANCE CLEAN YOUR RANGE HOOD REGULARLY. CLEANING 1. Use only mild soap or cleaning solutions to clean the range hoods outer surface. Dry surfaces using a soft cloth. 2. Stainless Steel cleaner may be used on the external surface. 3. Cleaning the Baffle Filters: For daily cleaning, use hot, soapy water and a soft cloth. Wipe dry and finish with a damp micro-fiber cloth.
TROUBLESHOOTING CAUTION: ALWAYS UNPLUG UNIT FROM POWER BEFORE SERVICING PROBLEM SOLUTION TOOLS My range hood is noisy. A. Check inside the range hood for any loose debris and remove. A. The range hood and cooktop are too far away from each other. Optimal distance is 25” to 35” Phillips Screwdriver My range hood has poor performance.. Phillips Screwdriver B. There are too many open windows or doors in the area. Close some doors or windows. C. The motor performance has decreased due to wear.
WARRANTY AND SERVICE For full warranty details on this product please visit: http://www.cosmoappliances.
