Use and Care Manual

CAUTION: HOOD MAY HAVE VERY SHARP EDGES; PLEASE WEAR

PROTECTIVE GLOVES WHENEVER IT IS NECESSARY TO REMOVE ANY

PARTS FOR INSTALLING, CLEANING OR SERVICING.

Step 1:

Place the range hood on the wall and mark the

position where you want to install. A height of

25” to 35” is recommended for optimal

performance.

Step 2:

A. According to the space between the holes

on the back of your range hood (see figure 232

in the picture). Drill 2 8mm holes on the wall 2 -

2 1/2 inches deep.

B. Press the two Expanding Tubes (Anchors)

into each hole. Screw the two included wood

screws into each anchor. Make sure that they

are firmly screwed in and that there is no

movement.

C. Hang the range hood on the two wood

screws aligning with holes pictured in (fig. 232).

Make sure it is level and stable.

Step 3:

Find the exhaust pipe, attach it to the top air

outlet. Make sure it is connected tightly to the

air outlet.

INSTALLATION PROCEDURES

0.50"

9.1"

14.5"