Owner Manual

43 44
Setting Cooktop Controls
SYMBOLS
IGNITION AND OPERATION OF THE GAS BURNERS
1. To obtain a flame more easily, light the
burner before placing a cooking utensil
on the burner grate.
2. To light a burner, press the knob of the
burner fully down and turn it counter-
clockwise to the “maximum flow”
setting symbol:
. (See Figure 30)
3. After lighting the flame, keep the knob
pressed down for about 10 seconds.
This is necessary to heat up the
thermocouple and activate the safety
valve, which would otherwise cut off the
gas flow.
4. Check that the flame is even and turn
the control knob to adjust the flame as
required:
. (See Figure 30)
5. If the burner fails to ignite, wait one
minute for the gas to dissipate before
attempting to reignite. At this moment
it is possible to adjust the flame
intensity by rotating the knob counter-
clockwise to the desired position.
6. In the instance of a power outage,
place a lit match near the burner and
proceed as already described. If the
burner does not light after a few
attempts, check that the “burner cap”
and “flame cap” are correctly positioned.
7. To turn off the flame, turn the control
knob clockwise to the:
● symbol.
Always lower or turn off the flame
before removing pans from the burners,.
(See Figure 30)
ALWAYS USE CAUTION WHEN LIGHTING BURNERS MANUALLY.
Figure 30
OVEN COOKING
Setting Oven Clock and Timer
DIGITAL CLOCK
This model has a digital display 24 hour clock
with 3 control buttons. When first connected to
power (or after a power outage) the screen will
display ’12:00’ and the bar above the
symbol will flash. (See Figure 31)
ADJUSTING THE CLOCK
To set the correct time, press the + or – button
to advance forward or backward until the
correct time is displayed. When finished you
can press the function button, otherwise wait 5
seconds it will stay at the set time. (See
Figure 31)
MANUAL OPERATION
Press the function button to select manual
operation.
COOKING WITH THE TIMER
By selecting the desired end time, cooking
time, temperature and cooking mode you can
set the oven to cook your dish automatically.
(See Figure 31)
1) Press the function button until the bar
above the
symbol flashes, then
press + or – to set the cooking time.
2) Press the function button until the bar
above the
symbol flashes, then
press + or – to set the desired end time.
3) Set the temperature and cooking mode
using the thermostat and selector
knobs.
Figure 31