Manualshelf

Use and Care Manual

ManualsBrandsCosmo ManualsAppliances36 in. Convertible Wall Mount Range Hood in Stainless Steel with Touch Controls, LED Lighting and Permanent Filters
10111213141516171819
RECIRCULATING CHARCOAL FILTERS
Installing Recirculating Filters (For Ductless Model Only)
1. Remove the Baffle Filters
2. Locate the Motor
3. Place a Carbon Filter on one side of the motor and align with the center.
4. Press the center of the filter, twist and lock into place.
5. Repeat steps 2-4 for the other side of the motor.
6. Place the Baffle Filters back into place.
12
Skip this page if you are installing a Ducted Range Hood.
Charcoal Filters are only included with Ductless Models
Note: Chimney Vent Holes located on the sides of the chimney must be
exposed to let the filtered air recirculate.
Step 7:
Extend Inner Chimney to the Ceiling.
Align sides with Mounting Bracket.
Firmly screw sides of Inner Chimney
into bracket with B screws (shown in
parts list).
11
Step 8:
Insert and install filters according to the
diagram.
11