Full Product Manual

8 9
IMPORTANT: Please observe all governing codes and ordinances. It is
recommended that a qualified technician install the range hood. It is the
installer's responsibility to comply with installation clearances specified
on the model / product rating label.
Range hood's location should be away from strong draft areas such as;
windows, doors and strong heating vents.
Cabinet opening dimensions that are shown must be used. Given
dimensions provide minimum clearance.
LOCATION REQUIREMENTS
INSTALLATION DIMENSIONS
24”-36”
30.75”
to
42.25”
Minimum Drop -
Down Height: 30.75"
Ceiling Height: 8-9 Feet
VENTILATION REQUIREMENTS
A. Chimney hole
B. 6" (15.2 cm) round vent
A. Roof cap
B. 6" (15.2 cm) round vent
Part CFK1-TM is required (Sold Separately).
This range hood is factory set for through
the roof or wall.
Rear Venting
For Ductless (Recirculating)
Installations